Newsroom
  Hardware
 


Acquisition systems

arrow Alt Logger & Abox
arrow Matrix
arrow Aquisition system software

Winches

Imaging probes
arrow Acoustic televiewer
arrow Optical televiewer
arrow Full wave form sonic

Other probes

 
Wellcad
  Support
  Services
  About us
   

 

WINCHES (PDF)

MX series
The MX winches are available in various configurations.
The system is equipped with slip ring and connections through which surface instrumentation can communicate with the probe. A precision measuring wheel and rotary encoder are also included to allow the amount of cable played out to be tracked. The cable is automatically wrapped on the drum in even layers through the level wind mechanism. The motor is controlled by a 110V (or 220V depending on the model) four-quadrant motor speed controller that allows the speed to remains constant with a varying load and prevents overhauling with heavy loads.
Dynamic electronic brake is a standard item with a mechanical (disc) brake optional.

Motor
Controller
Speed
Load
Cable capacity


Cable Off-axis tolerance
Depth Encoder
1/4 hp, SCR type
4 quadrant, with current limit
0 to 85 ft/min (26m/min)
100lbs (46 kgs)
4MXC 3281 ft (1000m) 1/8” (3.17mm) dia. Cable
4MXB-1000/1000ft (305m) 3/16” (4.76mm) dia.cable (video)
4MXA-1000/1640ft (500m) 1/8” (3.17mm) dia.cable
10°left, 10° right, 12° down, 45° up

BEI Model H20 (200pulses/turn) standard, others available

Winches

WNA series

Versatile WNA series of winches are designed for installation in logging vehicles or skid units. WNA winches offer standard depth capability of 1800meters (5905 feet) and are equipped with a two-speed transmission, manual and electronic braking system, optional tension sensor with automatic cutoff, and LED depth/speed/tension display.